Cable & connectors

Wireless Receiver 4CH Module "RXB39”

The RXB39 433MHz wireless receiver module supports ASK/OOK modulation, offering high sensitivity and low power consumption. With a compact design, wide voltage range (3.3V–5V), and stable performance, it’s ideal for IoT, home automation, security systems, and remote control applications.

₹139.00

uperheterodyne Wireless Receiver Module for Arduino

The RXB6 is a 433.92MHz superheterodyne wireless receiver module with excellent sensitivity (-116dBm). Operating from 3V–5.5V, it consumes just 6mA at 3.3V, making it highly efficient. Ideal for Arduino and IoT projects, it supports reliable long-range communication with low power usage.

₹159.00

Wireless Receiver 4Ch Module "RXB39-X" 433

The RXB12X is a 433MHz wireless receiver module with -107dBm sensitivity and extended range. It offers strong anti-interference, stable performance using SAW LO, and robust shielding. Supporting up to 9.6Kbps, it ensures reliable communication, making it ideal for remote controls, IoT, and automation.

₹149.00

433Mhz RF Wireless Transmitter and Receiver Kit

The AA098 FS1000A 433MHz RF transmitter and receiver kit enables simple, low-cost wireless communication for DIY and IoT projects. Operating at 433MHz, it supports data rates of 1–10Kbps with up to 100m range, making it ideal for remote control and sensor applications.

₹108.00

4CH RC 40MHZ PCB TX & RX Board For Toy Car

The QF1688 4CH 40MHz transmitter and receiver kit is designed for DIY toy cars and RC vehicle projects. With four channels, it allows dual motor control for forward, backward, left, and right movement, offering up to 10 meters of reliable communication range.

₹249.00

SPI To Ethernet TCP/IP Network Module Mini

The W5500M SPI-to-Ethernet module is a compact, high-performance solution with an 80MHz SPI interface and built-in TCP/IP stack. Supporting 8 sockets, multiple protocols, and auto-negotiation, it ensures reliable 10/100Mbps communication, ideal for embedded networking projects with efficient hardware-based data handling.

₹399.00

SIM800C GSM GPRS Shield

The SIM800C GSM GPRS Shield enables global communication with SMS, voice, and GPRS data support. Operating on 5–20V, it features Bluetooth 3.0, TTS, DTMF, and audio I/O. With built-in level shifting and multiple antenna options, it’s ideal for IoT and embedded projects.

₹999.00

QIACHIP Wireless 433MHZ RF Module With Mosfet

The RXL004 QIACHIP Wireless 433MHz RF Module provides stable remote control with a 50m range. Supporting 3.6V–24V DC and up to 2A load, it offers Momentary, Toggle, and Latched modes. Compact, sensitive, and reliable, it’s ideal for DIY lighting and automation projects.

₹199.00

RF Module TX RX 433 Without IC

A compact RF communication board featuring a 433 MHz transmitter and receiver pair. It supports wide input voltage (2.5–12 V), low-power operation, and data rates of 1–10 kbps. Ideal for short-range wireless signaling with deep‑sleep capability.

₹159.00

Wireless Transmitter Receiver 1CH Module “RXB38-TX6" 433

Compact 433 MHz wireless module set featuring high sensitivity, stable frequency, and low power consumption. Designed for one-channel RF communication, it's perfect for simple RF applications with a transmission range of up to 100 meters.

₹249.00

Gold 5V Bluetooth Audio Amplifier Module

Compact Bluetooth 3.0 audio module with built-in signal decoding. Operates at 5 V and directly interfaces with audio amplifiers, offering low power usage and seamless wireless audio integration in custom music systems.

₹169.00

CJMCU TCA9548A I2C 8CH MULTIPLE EXT. DEV. BOARD

This CJMCU TCA9548A module expands a single I2C bus into eight channels. Featuring bidirectional switching and 5 V-tolerant inputs, it's compatible with I2C/SMBus devices. It offers low standby current and strong latch-up protection for reliable multi-device connectivity.

₹210.00

NEO-M8M GPS MODULE WITH CERAMIC ACTIVE ANTENNA

The NEO-M8M GPS module provides accurate global positioning with support for NMEA, RTCM, and UBX protocols. Featuring -167 dBm sensitivity, SMD mounting, and Galileo satellite compatibility, it ensures reliable performance within a 1.7 V to 3.6 V power range.

₹1,199.00

RDA5807 FM STEREO MODULE

The RDA5807 is a compact FM stereo receiver module with I2C interface and low power consumption. It features built-in ADC, digital frequency synthesizer, bass enhancement, noise cancellation, and supports direct earphone output with no external audio driver required.

₹99.00

Flyrobo HC-12 433 SI4463 Wireless Serial Module Electronic...

The HC-12 module offers robust 433 MHz wireless communication with a TTL serial interface. Featuring high sensitivity, multiple modulation options, and low power consumption, it’s ideal for long-range data transmission in embedded and hobbyist electronics applications.

₹399.00

ENCJ28J60 INTERNET MODULE

The ENCJ28J60 Ethernet module offers SPI communication for internet connectivity in embedded systems. It features IEEE 802.3-compliant MAC, dual-port RAM, control registers, and a PHY interface for efficient data encoding and decoding over twisted-pair networks.

₹249.00

RDM6300 125KHZ EM4100 RFID CARD ID READER MODULE

The RDM6300 is a compact 125 kHz RFID reader module supporting EM4100-compatible tags. It offers up to 150 mm read range, under 100 ms decoding time, UART communication, and supports external antennas for flexible RFID integration in embedded systems.

₹349.00

BLUETOOTH (MASTER+SLAVE) WITH BUTTON BIG IC

The HC-05 Bluetooth module supports both master and slave modes using Bluetooth v2.0+EDR. Operating in the 2.4 GHz ISM band, it utilizes GFSK modulation and offers reliable wireless communication with up to +4 dBm emission power and –84 dBm sensitivity.

₹349.00

-10%

AI Thinker SX1278 Wireless Transceiver

The RA-02 module by AI Thinker is a long-range 433 MHz wireless transceiver using the SX1278 chip. Featuring –148 dBm sensitivity, +20 dBm output, and up to 15 KM communication range, it offers a compact, shielded design ideal for remote RF applications.

₹449.10 ₹499.00

HC-05 6pin Bluetooth Module(Master+Slave) with Button

The HC-05 is a dual-mode Bluetooth module with 6-pin interface, supporting both master and slave roles. Featuring Bluetooth v2.0 protocol, 3.3 V operation, and onboard mode-selection button, it integrates easily with GPS systems, meters, PDAs, and microcontrollers.

₹299.00

Smallest Sim800L GPRS GSM Module Microsim Card Core Board...

The SIM800L is a compact GSM GPRS module supporting quad-band frequencies. Operating on 3.4–4.4 V with TTL serial interface, it features low power consumption, A-GPS support, and includes onboard signal LEDs and antenna options for reliable wireless communication.

₹329.00

SIM900A V4.0 GSM GPRS Wireless Kit

The SIM900A V4.0 GSM GPRS module supports 2G/3G/4G SIM cards and operates on 5V or 3.5–4.5V input. With TTL serial compatibility (3.3V/5V), ESD protection, dual antenna options, and low power standby, it ensures stable wireless communication.

₹599.00

UBLOX NEO-6M with EEPROM with Antenna

The NEO-6M GPS module offers precise positioning with 5 Hz updates, EEPROM for saving settings, and a hot start time of just 1 s. Featuring a 3.3 V supply, -162 dBm sensitivity, and separate 18×18 mm antenna for enhanced signal strength.

₹279.00

NRF2L01 + Wireless Module 2.4 GHZ

The NRF24L01+ module enables robust 2.4 GHz wireless communication with speeds up to 2 Mbps. It features 125 channels, built-in CRC error detection, low power usage, and an integrated antenna, making it ideal for embedded and industrial control systems.

₹159.00

WIFI Bluetooth Module MCU Low Power ESP3212

The ESP32S module integrates WiFi and Bluetooth capabilities with a dual-core Xtensa LX6 processor. Offering up to 600 DMIPS, 520 KB SRAM, and 3V–3.6V operation, it supports low-power applications with flexible memory interfacing and strong wireless connectivity.

₹299.00

ENCJ28J60 Ethernet Module AA113

The ENC28J60 Ethernet module provides reliable network connectivity with the genuine ENC28J60 chipset. Powered by 3.3 V, it features a HanRun HR911105A Ethernet port, 25 MHz crystal oscillator, and is fully compatible with Arduino and other embedded platforms.

₹499.00

IIC/I2C Serial Interface Adapter Module

The I2C serial interface adapter module simplifies LCD display connectivity using just two I2C pins. Operating at 5 V, it supports 10×16 character displays, features an adjustable contrast potentiometer, and offers compact size for embedded applications.

₹159.00

Bluetooth Audio Module Power AMP Board 3.5-5V

The BT28 Bluetooth audio power amplifier module delivers wireless audio streaming with integrated amplification. Operating on 3.5–5 V, it provides a compact and efficient solution for DIY speakers, audio projects, and portable systems requiring seamless Bluetooth audio playback.

₹199.00

Mini V2-Mini Node MCU 4m Bytes Lua Wifi

The Mini D1 NodeMCU V2 is a compact WiFi development board based on the ESP8266. Compatible with Arduino IDE and NodeMCU, it supports PWM, I2C, and interrupts on most pins and comes with multiple header options for flexible prototyping.

₹159.00

MCP2515 Can Bus Module TJA1050 REC SPI 51 Single

The MCP2515 CAN Bus module with TJA1050 transceiver supports CAN V2.0B standard with communication rates up to 1 Mbps. Featuring an SPI interface, 8 MHz crystal oscillator, and 120 Ω termination, it ensures reliable long-distance data transmission and low power operation.

₹199.00

SPI To Ethernet TCP/IP Network Module

The W5500 Ethernet module provides reliable network connectivity with built-in 10/100 Mbps PHY and SPI interface. Supporting multiple protocols including TCP, UDP, ICMP, IPv4, ARP, and PPPoE, it operates on 3.3 V or 5 V and integrates 32 KB buffer memory.

₹449.00

EM18 Rfid Reader Module

The EM-18 RFID module operates at 125 kHz with an integrated antenna and 9600 bps communication. Running on 4.5–5.5 V with 50 mA consumption, it’s ideal for access control, attendance, and RFID-based automation projects requiring reliable card-based identification.

₹459.00

USB-UART/ESP8266 Adapter Program Wifi Module

The ESP01A USB-UART adapter with CH340G chip simplifies programming of ESP8266 modules. Operating at 4.5–5.5 V with onboard 3.3 V regulator, it features a 1000 µF capacitor for stable current supply and an SMD crystal oscillator for reliable serial communication.

₹149.00

ESP-12F ESP8266 Serial Wifi Module

The ESP-12F WiFi module, based on ESP8266, supports 2.4 GHz communication with WPA/WPA2 security. Featuring multiple GPIOs, integrated TCP/IP stack, and AT command support, it delivers reliable wireless networking in a compact surface-mount package with low power consumption.

₹185.00

Wireless Receiver 4ch Module "RXB39-X"

The RXB39X is a 433 MHz wireless receiver module with four independent channels, designed for remote control and automation. Operating at 3.3–5 V, it uses a superheterodyne circuit for stable signal reception and features a compact 7-pin interface.

₹149.00

CJMCU MCP4725 I2C DAC Breakout Development

The CJMCU MCP4725 is a 12-bit I2C DAC breakout board supporting standard to high-speed interfaces. Operating on 2.7–5.5 V with onboard EEPROM, it generates analog signals from digital sources, ideal for audio, instrumentation, and microcontroller-based projects.

₹279.00

NRF24L01+PA+LNA WITH ANTENNA 1100 METERS

The NRF24L01+PA+LNA module with external antenna enables long-range 2.4 GHz wireless communication up to 1100 meters. Supporting 250 kbps to 2 Mbps data rates, it features SPI interface, low power operation, and built-in power amplifier and low-noise amplifier for enhanced performance.

₹259.00

3.3V ADAPTER BOARD FOR 24L01

The NRF24AD adapter board provides regulated 3.3 V power for NRF24L01+ modules. Accepting 4.8–12 V input, it simplifies integration with Arduino and other microcontrollers while ensuring stable operation. Includes onboard regulator, LED indicator, and easy module connectivity.

₹169.00

WIRELESS RECEIVER 4CH "2272/2262" WITH REMOTEKIT

The RXB226 wireless receiver kit includes a 4-channel receiver and handheld remote. Operating at 433/315 MHz with ASK modulation, it offers a 50–100 m range, low power consumption, and stable performance, making it ideal for remote control and automation projects.

₹299.00

AT-09 BLUETOOTH 4.0 UART TRANSCEIVER MODULE

-15%

AT-09 BLUETOOTH 4.0 UART TRANSCEIVER MODULE

The HM-10 (AT-09) is a Bluetooth 4.0 UART transceiver module supporting BLE communication. Compact and energy-efficient, it’s ideal for industrial automation, remote control, POS systems, Bluetooth peripherals, and embedded projects requiring wireless serial connectivity with low power consumption.

₹322.15 ₹379.00

ESP-01 ESP8266 SERIAL WIFI MODULE

The ESP-01 WiFi module, based on ESP8266, supports 802.11 b/g/n standards with Wi-Fi Direct and soft-AP modes. Featuring 1 MB flash memory, integrated 32-bit CPU, and low standby consumption, it’s ideal for IoT and embedded wireless applications.

₹175.00

QQF 4CH REMOTE CONTROL 27 MZ RX+TX WITH ANTEENA

The QF33 4-channel remote control kit operates at 27 MHz, featuring a transmitter and receiver pair with antennas. Built on durable PCB and metal components, it ensures stable performance, making it suitable for DIY electronics and wireless control projects.

₹149.00

MFRC 522 RFID MODULE WITH RF CARD AND FOB

The RC522K RFID kit features the MFRC522 13.56 MHz reader module with included S50 RFID card and key fob. Supporting ISO14443A protocols, it provides stable modulation, demodulation, and error correction, making it ideal for RFID learning, access control, and embedded projects.

₹179.00

shop by category

Home

Left Banner

Cable & connectors

Contact us

Products

Customer Support

Account

shop by category

Home  

Left Banner  

Cable & connectors

Home

Left Banner